OpenAI 展示 Codex 设计千兆以太网交换机硬件

Astra vs. real-world hardware What would it take for AI to design the hardware our software runs on? This project explores a piece of that challenge: a gigabit Ethernet switch that moves data between connected devices.

AI 导读

OpenAI 发布视频展示用 Codex 设计一块千兆以太网交换机板卡及其外壳。对话中 Codex 完成元件布局、收紧板面、把以太网走线改为平滑曲线并保持差分对成组，随后围绕元件设计钣金外壳、规划线缆走向与弯曲半径并完成装配。

打开原文tiktok.com

博主

OpenAI@openai

粉丝 107万

认证：verified account

OpenAI’s mission is to ensure artificial intelligence benefits all of humanity.

互动数据

浏览: 2.8万
点赞: 2429
评论: 39
分享: 269
收藏: 287

约为这个来源平时的 2.4 倍

数字来自平台，为最近一次抓取时的数据。

正文

以下是视频口播的自动转写，可能有错字。

Hey codex, let's design a relatively high speed board, maybe a gigabit ethernet switch, and an enclosure for it too. Absolutely, let's start with the board.

I have the components in mind. Let's get started on the layout. Let me lay that out. Move the lower components up, and make board smaller.

Keep the ethernet connections where they are. I'll tighten the layout around those fixed connections. Replace those sharp bends with smooth curves and keep the ethernet pairs together.

I'll smooth out the routing and keep each pair together. Okay, that looks good. Let's get it manufactured and sent over on its way.

Let's build a sheet metal enclosure around these parts, and make sure the cable routing is smooth, and all the bend radii are correct.

I'll fit the enclosure around the parts with room for the cables. Route the cables with smooth bends, and keep them clear of other components.

Then complete the assembly. I'll keep the cables clear and finish the assembly. Looks good.